HOW TO RIDE FASTER ON YOUR BIKE: 10 BETTER WAYS – GEAR AND KIT
Cycling enthusiasts want to ride faster on our bikes. It’s what makes us who we are. I’ve found there are 10 better ways to ride faster. In Part 1 I described the top 6 ways, all of which had to do with fitness or technique. In this post I’ll tell you about the next 4 ways. These are focused mostly on cycling gear and kit.
Here’s my list of the top 10 ways to ride faster on your road bike:
You can click on any of these and go straight to the description on each. Use the back button in your browser to return to this list. Or, you can read through the post to take them in order.
ABOUT THIS SITE
If you are new to In The Know Cycling, welcome. I started this site for enthusiasts like you and me who want to know – but don’t have the time to do all the research, product and price comparisons to figure out – what gear you should get next and where you should get it. I bring a rider’s perspective; I’m not a member of the cycling media, don’t run ads on the site or go on bike company-paid new product introduction trips, have never been biased by working for a bike company or in a shop that only sells certain brands, and I buy or demo and return everything I test.
If you like what you read, you can save yourself time and money and support the site at the same time by clicking on and buying your cycling gear through the red store links or anything at all through these links at eBay Cycling and Amazon. The red store links take you directly to the listings for the gear I’ve evaluated, at stores that have that gear in stock, at the best prices, and have excellent customer satisfaction ratings. I update these links regularly by looking at 100 or so stores I track that sell gear online. Some, but not all of these stores pay a small commission to the site when you buy through the links but I pick the stores based on price, product selection, and customer satisfaction, same as when I’m shopping for gear myself. There’s more on all of this at the about and support pages.
HOW TO RIDE FASTER TOP 10 – CONTINUED
7. Get the Right Gear
Gear is seventh? Freaking number 7? Steve, you’re killing me! Are you nuts? How can gear not be near the top?
I hear you. Many enthusiasts think it’s all about the gear. The hype machine focuses a lot on the gear the pros use and less on how one rider is 2 kilos lighter than last year or how a second really improved his descending technique or how a third did some different training leading into the season to improve his position on the bike.
So, what you need to know is that most pros are already pretty good at the first five or six ways I’ve described to go faster on a bike and most road cycling enthusiasts aren’t. All things being equal, gear will make a big difference in going faster but all things are not equal. If you are mentally, physically, and bike fit and have strong technique including knowing how to ride in a paceline and position yourself riding on your own, you’ll go faster than someone riding top-of-the-line gear but doesn’t have the fitness and technique you have.
It’s when you are making good progress in your fitness and technique or taking it as far as your talents and time will let you that you’ll want to start getting better gear to ride faster.
This is where it gets interesting, controversial, quantifiable and, I think, exciting. Yes, doing a great interval training ride is something you can get psyched about and dropping 10 pounds coming into the season is something to be proud of. But, getting a new light bike or carbon wheelset or even some low rolling resistance tires can really get the adrenaline flowing.
So let’s dive in and pick out some gear to make you faster.
Weight vs. Aerodynamics
First, let’s deal with one of the most argued questions. Should I spend my money on lighter weight or more aero gear?
The simple answer is yes, spend it on both as both lighter weight and more aero gear will make you faster. The more nuanced answer is it depends on what kind of riding you are doing to know which to prioritize.
It’s at times confusing and maddening. So let me try to sort it out in a dispassionate way.
First, unlike pro cyclists, please recognize that road cycling enthusiasts are not full time, sponsored, young 20 or 30-something, world class competitive riders who have only 6% body fat, ride 30,000 kilometers or 20,000 miles a year, average 42kph/26.5mph over the course of 5 hour 200K race, generate 5 to 6 watts per kilogram of weight over a 1-hour maximum effort, employ veteran race tactics, get free gear, etc., etc.
Most of us enthusiasts ride around work and family commitments, are older, less skilled, heavier, don’t ride as much, as long, as fast or as powerfully, try to ride with our buddies rather than escape from them, and pay dearly for our gear. Our spouses? Not always happy with us. (See MAMIL on the right) But let’s hope we are better paid, better looking, and happier people. Or at least two out those three. You pick ‘em.
So as a starting point, both weight and aero as promoted by most bike companies have a much greater effect on separating out pro riders than it does enthusiasts. It benefits us for sure to ride with lighter, more aero components but it’s just one of the things that separate us. Ways 1 though 6 above matter more if you want to ride faster on your bike.
When weight matters most…
For the enthusiast rider, weight matters when you are climbing and when you are accelerating. It doesn’t matter when you are riding on the flats at a steady speed. The more you, your bike and whatever you are carrying on your bike (water, tools, tubes, pump, food) collectively weigh, the more energy and power you will need when you accelerate and when you climb.
If you are regularly climbing mile long, 7% or steeper pitches, you’ll benefit from lighter gear. But, lighter gear comes at a big cost relative to dropping a few of your own pounds or kilos.
As for gear, consider what added speed you can get going up one of those long 7% pitches if you jettisoned 4lbs/1.8kg off your bike by trading up from your current carbon frame to one of the new superlight climbing ones and by leaving off some of the extras you carry in your bag or back pocket. On this lighter bike, a 150lb/68kg to 160lb/73kg rider putting out an average 200 to 250 watts would save about 10 seconds/mile or 6 seconds/km. That’s about 70 seconds faster up the famed Alpe d’Huez, a 6.8 mile/11 kilometer climb with an average gradient of 8.1%.
That same ride up the Alpe d’Huez with a 300 gram lighter wheel, about the difference going from a stock wheel to a good all-around one or from that all-around to a climbing specific tubular, would save you about 2 seconds/mile or about 15 seconds over the entire climb.
Those time savings are huge, if you are racing. If you want to go faster up a climb in general and are willing to pay the money to get those weight savings, lighter weight gear can get you there. Note that losing the same 4 or 5 lbs or 2 kilos from your gut would save you the same 85 seconds and cost you next to nothing. So do that too.
If you accelerate a lot following or are making moves in races or on group rides, weight also matters. Racers accelerate more frequently than enthusiasts, especially in short races like criteriums, to change the pace and drop riders.
When it comes to accelerating, wheelset weight is rotating weight and, according to physics, rotating weight takes twice the energy to accelerate as other weight that is static elsewhere on the bike. So when you go to a lighter wheelset, if you save 150 grams it has the effect of saving approximately 300 grams elsewhere on the bike.
The weight of the rims, which typically makes up 60% to 70% of the wheels’ total weight, plays the most important role since it is both furthest from the center of rotation and makes up the biggest percentage of wheelset weight. Saving weight at the hubs with carbon flanges, aluminum hub bodies or ceramic bearings does next to nothing to improve your acceleration but can increase the wheelset price by several times. (See Campagnolo Zonda vs. Eurus vs. Shamal Ultra. Fulcrum, Mavic, others do the same.)
Unfortunately, in the big picture, reducing the weight of your wheels, components or bike has a small relative benefit to saving the watts of energy you use when you accelerate. Why?
- You have to accelerate your own weight plus all the weight of your bike. A 400 gram wheelset savings on a bike and rider that together weigh 80kg/175lbs is only 0.5% of the overall weight, 1% if you consider it all rotational weight. That results in about a 5 watt savings in the 500 watts you’d have to expend to accelerate out of a pack going 36kph/22mph to 54kph/34mph in about 10 seconds. (More on those numbers here)
- In addition to moving your total weight, you also have to overcome your added aerodynamic drag and rolling resistance when accelerating, each of which takes about an order of magnitude more force to overcome than the 400g difference in wheel weight. (More here)
While holding off a full discussion of aero and rolling resistance for a moment, it’s worth noting that a lot of the analysis behind weight and aero benefits is done on paper or in a wind tunnel rather than on the road. This drives road racing writers like Seth Davidson, aka The Wankmeister of Peloton Magazine, up the proverbial wall or perhaps a 25% grade in a Giro stage.
In his excellent piece, Does Weight Matter, Wanky points out that every couple seconds or watts here and there make a huge difference to road racers when they are trying to make or follow moves during the course of a race. You find yourself 3 or 5 seconds back on a climb or on a flat and you are dropped. You have to expend a tremendous amount of energy getting back.
Or, you can wait for the group that dropped you to come back to you. Fat chance. Without the group, you lose the benefit of drafting which makes it doubly hard physically and psychologically to get back on.
If you have to make up that kind of gap several times during a race, you are probably riding on the rivet before long. At some point the pack is going to accelerate and if you can’t keep up, you’re done.
Does this translate to us as enthusiasts who don’t race much, if at all? If you are riding solo, a few seconds a mile on climbs or a few watts each time you accelerate out of a corner probably doesn’t matter unless you are comparing yourself against your personal best, targeting specific training times and power outputs or competing against others on Strava.
Do a friendly group ride, however and I think Wanky’s argument translates very well. I don’t know about you, but I feel like an absolute heel if I can’t keep up with my buds on a group ride. Not taking my share of pulls, getting towed along, or worse, having the group wait for me at the top of a hill or after we get stretched out makes me want to ride out in front of a bus sometimes. It certainly costs me a lot in paying for rounds of beer.
Sure, it’s more likely that I need to train more or better or that the guys I’m riding with are stronger than me on a given day. But, when I just can’t keep up with my guys or in a paceline or a century ride, I’m looking for those few seconds and watts here and there to be able to hang with them until I can get myself in better shape, improve my technique or find the fountain of youth (still looking). If it gives me enough performance benefit to make a difference along with the psychological lift that comes with it, I want the lighter gear and I’ll find a way to pay for it.
When aerodynamics matters most…
Aerodynamics matter all the time, as I hope you took from my discussion on body positioning under #6 above. Aerodynamic gear – mostly bikes, wheels and less so components – matter most when you are already going fast. Generally, you need to be averaging about 18 to 19mph or 30kph before you see a meaningful drag difference that translates to more than a few watts. And since the force needed to overpower your drag increases 3 times the increase in your velocity, the faster you go the more you need aerodynamic gear.
So, should you get a more aerodynamic bike or a lighter one? GCN looked at this question and concluded that there are some big time savings you can get on an aero bike, but the choice between an aero and lighter bike isn’t as simple as which rides faster.
In their on-the-road testing, GCN found the aero bikes to be about 1.5% or 0.25mph/0.4kph faster than lightweight bikes while riding at 300 watts for 10 minutes on a road with varying terrain. Independently, Cervelo also found a 1.5% reduction in drag in their comparison here.
Over 40K/25miles, GCN calculated that would result in a nearly full minute difference. I think it would probably be more like 30 seconds or so for most enthusiasts who can’t hold the speed that a 300-watt average output would generate over 25 miles and would lose the benefit of the higher reduction in drag at higher speeds. Nonetheless, even 30 seconds would be huge if you are into doing TTs or triathlons. If not, the relatively less comfortable aero bike might diminish the enjoyment of your time savings.
Here’s the video of the test GCN ran
Before you go out and buy an aero bike, consider that not all aero bikes are equally aero. The design of the bike and what wheels and components you put on it can make an aero bike no faster than a lightweight one.
To illustrate this point, consider the tests run by the German cycling magazine Tour. They ran comparisons of pairs of bikes – one aero and one lightweight – submitted by each of 12 leading manufacturers. Tour isolated the differences to the frames to a great extent by using common groupsets and wheels (Zipp 404 Fieldcrest). The tests simulated a 75kg/165lb rider doing 200 watts over a 100K/62mile ride with 2000 meters/6562 feet of elevation gain. This is more like the conditions of a fit enthusiast’s long solo training ride with a fair amount of climbing.
Tour found that, on average, aero bikes were indeed faster than lightweight ones. Also, the fastest aero bike in the test beat the slowest lightweight one by about 1% or 2 minutes and 30 seconds over the 100K ride. This would equate to 60 seconds over 40K/25miles.
The 1% in-the-lab test difference Tour found between the fastest aero and slowest lightweight bikes was in the same general vicinity as GCN’s on-the-road 1.5% finding, quite remarkable considering all the different test variables.
For example, GCN’s test used low profile wheels on the lightweight bike to minimize weight while the aero bike used pretty deep aero ones. Tour’s test used the same aero wheels on both. GCN used former pros on a short circuit with just two bikes. Tour used just the pedaling lower half of a robotic dummy across 24 different bikes. So the fact that the difference wasn’t any bigger than the 1.5% range convinces me that this is about the most benefit you get going to an aero bike.
What I find disconcerting though, was that the differences between the fastest and slowest aero bikes in the Tour test was about two minutes (1 minute 54 seconds) over the 100K simulated route. Remember the difference between the fastest aero bike and the slowest lightweight bike was only 2 minutes and 30 seconds.
Also, the biggest difference between an aero bike and the lightweight one from the same manufacturer was only 2:03. But, for 9 of the companies their aero bike beat their lightweight one over the 100k/62miles Tour test by less than 1:15 minutes or about 0.5%. Surprisingly, in the case of two companies, their lightweight bikes actually beat their aero ones. Mon Dieu!
Further, Tours’ mechanical tests of rigidity and compliance showed the fastest aero bike was also the least stable and comfortable. Aero bikes are optimized to reduce drag by using flatter tubes that cut through the wind. Unfortunately, these tube shapes are less than ideal to improve rigidity and dampening.
So, if you already ride fast with big power output, you enjoy and are flexible enough to ride a race geometry bike, you are willing to trade off reduced stability (i.e., handling performance) and comfort for speed, you like to sprint at the end of race to win by a wheel length, and you don’t plan to ride your bike in the mountains, you will value the faster aero bike rather than a lightweight one. Just make sure to get one of the faster aero bikes, not just any aero bike or it won’t really matter.
(Are you getting my hint not to go for one of these? Good.)
If you plan to do time trials and the occasional triathlon, forget about the aero frame and get some aero bars to put on your lightweight or endurance bike. The way that aero bars move your arms in and torso down will save you a couple minutes over 40K/25miles rather than taking 100K/62 miles that Tour’s test simulated to save you that same amount of time on their best aero frame. Going with aerobars is about 3x the benefit of going to an aero bike.
While Tour’s test showed that an aero bike, or really an aero frame, is marginally faster than a lightweight one, it also showed that putting aero wheels on a lightweight bike makes it nearly as fast as a bike with an aero frame and aero wheels.
So how much speed comes from aero wheels? And, what penalty do you pay for aero wheels going up hills and when you accelerate?
These are much analyzed and debated questions. I think much of the debate comes from what is being tested and how the tests are done. Unless you are building your own bike or buying a $10,000 model, you usually can only buy a new bike with a set of basic, low profile alloy ‘stock’ wheels. It’s best then to compare aero wheels versus these alloy ones that you are replacing to see how much faster you’ll go by spending big on the new wheelset.
There have been many analyses and wind tunnel tests done over the years to establish the drag and watts absorbed by wheelsets of different depths and profiles (box, V, U and toroid) and at different angles to the wind (also known as yaw).
One of the most extensive and independent comparative tests on wheel aerodynamics was in 2007 by Roues Artisanales and remains the benchmark today.
As you can see in the chart above (click it to enlarge), a 2007 model year Mavic Ksyrium, Fulcrum Racing 7, Campy Hyperion or Citec 3000S stock wheel from that period absorbed about 30 to 33 watts of energy in the face of a 50kph/31mph wind at a weighted combination of angles to the wind that road cyclists are typically known to ride. Sadly, the rim profile and, assumedly aerodynamic performance of many of these (and most other) stock wheels have not changed much, and in many cases at all, since the time of these tests.
Compare the watt numbers of the stock alloy wheels to the Citex 6000, HED 3, Zipp 404 and other top performing aero wheels of that period. These circa 2007 aero wheels absorbed 19 to 21 watts, 11 to 12 watts better than the stock alloy ones.
Many new and more aero wheel models have been introduced since the time of this test. The aero profiles have improved by moving to a more rounded versus a V-shaped leading edge and with use by some of a toroid or bulb-shaped wall instead of one whose width remains the same or gets linearly wider as it approaches the brake track. The wheels have also gotten notably wider as measured across the opening between the brake tracks and the beads where the tire attaches.
Together these design changes have essentially increased the aero benefit of a mid-depth aero wheel like the latest generation Zipp 404 Firecrest over low-profile alloy stock wheels like the Fulcrum Racing 7 or Mavic Ksyrium SR by about half again, roughly to about 18 watts of difference at 45kph/28mph, an estimate I came to by triangulating a range of research I’ve reviewed.
Over a 40K/25mile long distance, that 18 watts of savings will save you about a 65 seconds of time.
Compare that 18 watt/65 second savings going to aero wheels to the 25 watt/90 second savings from optimally positioning yourself on the bike 50% of the time that I described before and you can see why we go ga-ga over aero wheels. That’s why upgrading from stock wheels to more aero wheels is such a high-value upgrade.
A few other things are important to note.
- There aren’t huge differences – a few watts, about a second every three kilometers/two miles – in aero performance between mid-depth (45mm to 60mm) wheels that roadies use and the deep dish (Zipp 808s and the like) that triathletes use. Enough for triathletes to justify it but not enough for road enthusiasts to worry about it, especially considering the disadvantages of handling the bigger wheels and their extra weight.
- There aren’t big differences between clincher and tubular aero wheel drag, though clincher tires have been shown to have lower rolling resistance than tubular.
- There aren’t big differences in aero the performance between the top brands. See the chart below from ENVE
While wheel makers will use every gram of drag difference to market their wheels one way or another, the important take away is that you should ride aero wheels if you want to go faster, but you don’t need to obsess on the relative aero merits of one brand vs. another. You should look instead at the whole package of benefits and drawbacks that come with a wheelset including their stiffness, comfort, handling, weight price, how they appeal to you, etc. I consider 20 performance, design, quality and cost factors in my selection criteria for all-around wheelsets, which you can read here.
The acceleration benefits of a more aerodynamic wheel are also notable. Using a similar scenario to that described earlier when looking at the acceleration benefits from lighter wheels – 80kg /175lb rider and bike, accelerating for 10 seconds, etc. – you can see in this analysis that more aero wheels produce about the same acceleration benefit as lighter wheels.
I say “about the same” knowing that the difference in this analysis and others I’ve seen usually favors the more aero wheel. The difference, however, is a matter of less than a wheel length, an amount that I think would be trumped by so many other variables (e.g. body position, power output, wind direction, kit fit) that the enthusiast couldn’t isolate a difference between the weight and aerodynamics designed into the wheel in the real world on the road.
Remember drafting has the biggest effect – 30% to 50% energy saved when you are riding in a group. When you are getting those drafting benefits, you don’t get the full aero when riding alone in the wind. If you a riding in a pace line all the time, you get maybe half to two-thirds the aero benefits from your gear compared to what you would get riding alone in the wind.
The important thing is that, compared to the stock wheels that likely came with your bike, you can both reduce your wheel weight and improve your aerodynamics with a deep all-around, 45mm to 60mm carbon wheelset. I don’t really see the reason for this weight vs. aero argument to continue when you can have your cake and eat it too as far as going faster is concerned, assuming you can afford the cake.
When tires matter most…
In this unnecessary weight vs. aero debate, a discussion of tires is usually left out. This is a huge mistake. Tires create rolling resistance that takes power to overcome. Tires have a shape which plays a part in your wheels’ aerodynamic performance. Tires and tubes have weight which contributes to your rotational mass. All of these, roughly in that order with aerodynamics close behind rolling resistance in importance and weight way behind the others, play a role in how to ride faster on your bike.
Different brands, tire widths and tire pressures you select will create more or less rolling resistance, better or worse aerodynamics, and more or less weight.
– This section goes into the theory and results detailing what I’ve tried to simply state above. It gets quite involved. If you don’t want to wade through it with me, I understand and won’t be hurt. Instead, just go out and get a pair of Continental Grand Prix 4000 S II tires (at eBay Cycling, Merlin, Wiggle) in the 23C/23mm size or 25C/25mm size (the 25s only if you have wheels that are 27mm or wider at the brake track) and you’ll go about as fast or faster than on any other set of tires.
If you want to know why I and a lot of other people pick that tire or you think you should get another brand (like a Michelin or Vittoria) or another type of tire (like a tubeless) or even a wider size tire (like the 25C or 28C) on whatever width wheels you have because it’s what everyone seems to be doing these days, keep reading. I’ll try to explain the tradeoffs and speed gains and losses from different tire designs and models in language enthusiasts can understand. Warning, it does get a little intense at times.
But, I won’t talk about tire weight any further. It makes an almost insignificant difference in your choice of tires and I’ve already written about weight’s effect on speed earlier. Tube weight matters, not tire weight, but not because of the lighter weight. It just turns out that a lighter weight tube provides better rolling resistance.
Are you with me? OK. Here we go. First, some more background.
Rolling resistance is caused by the friction created within the materials that make up the tire, the amount of deformation of the tire over time (aka hysteresis) and the energy of the tire leaving and coming back into contact with the road surface. The more friction, hysteresis, and on/off contact with the road, the greater the amount of tire rolling resistance.
A tire that is suppler or more flexible, often because of the higher fiber thread count and more elastic compound used in the tire will create less friction and less rolling resistance than one that has a less flexible casing. Using a thin butyl tube or a harder to find (and probably more trouble than it’s worth) latex tube inside a clincher tire instead of the more common, thicker and more puncture resistant butyl tube used by most enthusiasts today will also reduce rolling resistance.
Tom Anhalt writes the Blather ‘bout Bikes blog and is currently the leading independent tester of tire rolling resistance who also publishes the data comparing various tire models. His tests show that tires with the least rolling resistance can save you 5 to 10 watts at 40kph/25mph or about 20 seconds over 40K/25miles. You can also save another 5 to 8 watts using a latex tube versus a butyl one at 40kph.
The best clincher tires today have about the same rolling resistance as the best tubular ones. Tubulars don’t give you a rolling resistance advantage. The best tubeless tires are within a couple of watts of clinchers as well so you don’t lose anything in rolling resistance performance going with the best tubeless versus the best clinchers. There are, however, fewer tubeless tire models with low rolling resistance than there are clincher ones among those Tom has tested. You can see Tom’s tire rolling resistance spreadsheet here.
Three huge caveats:
1) Some of the tires with the lowest rolling resistance have very high thread counts, very high prices and don’t last as long as your typical everyday training tires. Take them out for races only, if you race. There are everyday tires that come in only a few watts away. The enthusiast should go for those.
2) Latex tubes can be quite expensive, are less durable on the road, need to be topped off with air every day and don’t store well in varying temperatures. These issues make them less practical, harder to find and probably suitable only for racers. Don’t expect to leave one in your saddle bag for months and expect it to be ready to rock when you need it. Too bad but true. The best option is to go with a light butyl rubber inner tube for fast riding and a heavy butyl one for training. The light or thinner butyl tube will probably save you about 2-4 watts over a heavy one.
3) The biggest caveat is that rolling resistance is only part of the equation in figuring the relative speed benefit one tire gives you over another. Aerodynamics is the other and while what normally improves rolling resistance worsens your aerodynamics, they don’t have a totally predictable relationship. Stay with me. We’ll get into that a little further down in this section.
Let’s look next at the affect of tire width and inflation pressure on rolling resistance.
At the same tire pressure, a wider tire will have more of the tire’s width and less of its length in contact with the road than a narrower one. This wider ‘contact patch’ will create less longitudinal deformation and therefore less rolling resistance. The benefit of the wider tire diminishes as you get incrementally wider. Going from a 19mm to a 20mm wide tire can save 1 watt, shifting from 23mm to 25mm tire saves less than a half a watt. So while there’s a real handling benefit going to a wider contact patch and there is an aerodynamic effect which I’ll discuss later, there’s not a big rolling resistance benefit going to a wider tire.
The effect on rolling resistance at different tire pressures depends on the surface you are riding. On a relatively smooth road surface like those most road cycling enthusiasts ride most of the time, a more inflated tire will create a smaller contact patch, the added pressure supporting more of your weight than a less inflated tire would, and you’ll move down the road with less rolling resistance.
On a bumpier road like those off-road paths and trails ridden by cyclocross riders and mountain bikers, the unevenness of the road will cause a more inflated tire to leave and come back in contact with the trail more frequently than a less inflated tire, creating more rolling resistance for that more inflated tire than on a smooth road. The less inflated tire, despite increasing its rolling resistance from a bigger and longer tire patch needed to support your weight, will have less additional rolling resistance on an uneven road than will a more inflated tire because the former tire will lose contact with the rough road or trail surface less frequently than the later will.
Relatively speaking then, a more supple, wider, and more inflated tire will provide less rolling resistance than a less flexible, narrower and less inflated one on the surfaces that most road cycling enthusiasts ride.
Specifically, how many watts of difference does tire width and inflation make on rolling resistance and how rough a road is needed for you to want to lower your pressure below what you normally would to improve your rolling resistance?
A series of rolling resistance tests performed by an independent lab for VeloNews (here) shed some light on at these questions. They compared different widths or two models of tubular tires with similar casings (or suppleness) and different tread patterns. Each width tire was also tested at different inflation pressures. The tires rolled up against a drum whose surface texture simulated what would be a relatively rough road surface for road cyclists, one with cracks or made of a combination of asphalt and fine aggregate commonly known as ‘chip seal’.
The results showed that width and inflation pressure differences have a pretty small effect on rolling resistance within the range of variables and conditions most enthusiasts ride. The rolling resistance at 40kph/25mph for one model of tires was about 3 watts less for the 24mm wide size than the 22mm version. A second model of tires showed about 1.5 watts less rolling resistance for its 25mm wide size compared to the 24mm one.
Even on the rough road surface this test simulated, the tires inflated at 112 psi had less rolling resistance than the ones inflated at 84 psi by 0.1 to 0.3 watts for tires of the first model and by 0.5 to 1.5 watts for the tires of the second model.
The two models had different tread patterns but the results show they didn’t alter the conclusion you can take from these tests.
If you came of riding age like me when narrow, hard, 120psi tires were the manly thing to ride, and because you thought that those characteristics put the least amount of tire in contact with the road, we were partly wrong as far as minimizing rolling resistance. Now, most of us want a wider tire with a lower pressure for better comfort and handling. That combination doesn’t provide the least rolling resistance either.
I’m a firm believer that handling and comfort comes first, especially if I’m going to stay confident and energized over the course of a long ride. I want the right width and inflation that is best to meet these objectives, rolling resistance differences be damned. Taken together, the width and tire pressure differences in the VeloNews commissioned tests varied at the extremes (wider/more inflated vs. narrower/less inflated) by only about 2 to 3 watts. So what you see is that you aren’t penalized or benefited greatly (a few watts at the extremes) by picking the width and inflation pressures that you prefer.
This chart shows the recommended pressure for your weight and tire width. These are good guides or perhaps starting points in finding your most confident and comfortable inflation levels.
Unfortunately, you cannot look at tire rolling resistance and aerodynamics independently. They must be considered together and in light of the width of your rims.
The first thing to note is that narrower tires are usually more aerodynamic than wider ones. This makes intuitive sense since narrower tires have less rubber going into the wind. Rims on alloy stock wheels and the most popular alloy upgrade wheels these days are 20mm to 21mm wide at the brake track or where the tire meets the rim. Modern alloy and carbon wheels typically run 23mm to 25mm wide.
For all of these types of wheels, 23C or what’s often labeled 23mm wide tires will typically be the most aerodynamic choice among those tires readily available. 21C tires would be more aerodynamic for 20mm to 21mm wide rims but they aren’t easy to find and you probably aren’t committed to maxing out your aerodynamic benefits if you have narrow alloy wheels in the first place.
I can already anticipate your next question: If 23C tires are ok on 20mm to 21mm rims, why not use 25C tires instead of 23Cs on today’s more modern 23mm to 25mm range rim, and get the lower rolling resistance and better handling benefits?
Well, there are a couple of reasons.
First, a 23C or 25C tire or even those labeled 23mm or 25mm don’t usually measure 23mm or 25mm. Most are around 1mm wider once mounted and inflated. Their variance differs from model to model so you don’t know what width tire you are actually getting from the 23C or 23mm designation on the label.
A few examples illustrate this point. Zipp’s low rolling resistance Tangente 23C tire measures 23.8mm but their 25C version is 24.7. The popular and outstanding Continental GP 4000S 23C measures about 24.5mm and its 25C measures 26.8mm. The ’23mm’ Michelin Pro 4 Service Course, another popular tire, actually runs just a few tenths above 23mm.
Once again, Tom Anhalt’s chart here is helpful as it also shows measured tire widths of a good number of popular tires.
Second, the most aerodynamic tire is one whose side wall continues the width and shape of the rim at and beyond where they intersect each other. The air flow will be more disrupted and therefore less aero the greater the difference in width between the rim and tire.
A tire that is considerably wider than the rim will also create a less aero ‘light-bulb’ shape. Air will travel more smoothly, staying attached longer to the rim-tire combination if the widths are closer and the tire’s sidewall is more vertical than bulbous.
FLO Cycling actually measured the aerodynamic drag of their 24mm wide FLO 30 front wheel with four leading tires and wrote up their tests here. Here’s the graph of the results:
Interestingly, the width of the tires used on the FLO 30 rim for this test, in order of most aerodynamic to least were 24.2 (Continental 23C), 23.0 (Bontrager 22C), 23.3 (Michelin 23C), and 21.5 (Vittoria 22C). I don’t think it’s a coincidence that these tire widths mounted on this 24mm width rim align with their combined aero performance. I also don’t doubt the tire’s performance order would be flipped if these same tires were on a 21mm rim like a Shimano Dura-Ace C35.
What’s the wattage difference? At the 48kph/30mph speed tested, the differences between the four tires tested varied from 0 to about 2.5 watts at the range of yaw or angles to the wind where road cyclists ride most of the time (Mavic’s Ponderation law).
Most of what represents the modern generation of wheels like the Zipp Fieldcrest, ENVE SES and FLO wheels were designed for 23C tires. Pick the wrong 23C and you’ll lose a few watts. Pick a 25C tire and you’ll lose even more. Josh Poertner, Zipp’s lead engineer during the Fieldcrest development reported little difference between the two widths up to 10 degrees of yaw on the 303 Fieldcrest wheels and as much as 3 to 6 watts at higher angles.
It’s hard to tell whether the improved rolling resistance of a wider tire outweighs the increased drag it brings on. Rolling resistance probably matters more in road racing where the aero benefit is reduced by the amount of time riders spend drafting and staying out of the wind.
If you are training or doing events where you are in the wind a lot (i.e., riding without a draft or at the front of a paceline), it may be more of a balance or favor aero. And, if you lower the pressure of your wider tires below what you run your narrower ones at (and the Michelin Man says you should), you increase the size of the tire patch, eliminating some of the benefit of the wider tire’s lower rolling resistance.
I don’t know about you, but it seems a bit crazy to me to buy a new set of wheels and then put a tire on it that promptly defeats some of the aero benefits you just spent good money on. From what I’ve learned doing the research for this article, my approach going forward is to pick a few tires with the lowest rolling resistance I can afford and then select the one whose actual width is as close to the brake track width of the rims I’m riding (or front rim if the rim widths are different). If I’m in more of comfort than speed mood on a given day, I can lower the tire pressure a little. I can always pump it up on days I’m targeting more speed.
Bottom line – between rolling resistance, aerodynamics and my knowledge of which tires to pick for my rims and how best to inflate them to get the right mix of speed, comfort and handling I want, I figure I’m going to save myself 5-10 watts of power or 20-40 seconds over 40K/25miles at the speeds I normally ride. That’s why tires should be a big part of the discussion if you want to go faster on your bike.
If you want to read my complete post and recommendation on which road tires to get, go here.
8. Suit up for Speed
Maybe your mom used to pick out your clothes when you were younger. Perhaps you played sports and had to wear the same uniform as everyone on the team right down to the socks. You started working and there was an explicit or implicit code outlining what you should and shouldn’t wear. Or you just felt the pressure to wear what was within the norms of style, taste, maybe even hip. Maybe you’re a jeans and a t-shirt kind of guy. Well, that’s a uniform of sorts too.
Cycling is a release from all of that for many of us. Express yourself with your choice and color of bike and kit, your selection of components, where you ride, who you ride with, what events you do. No two cyclists are the same. You are an individual! Vive la difference.
Well, I’m going to tell you that, if you want to ride faster on your bike, you’re going to have to conform to a cycling dress code of sorts. But unlike the restraints you may have felt with school or work clothes, this dress code is going to allow you to literally break free of the pack and every non-conforming cyclist too dumb not to realize how much faster they can go with these easy and inexpensive ways to suit up for speed.
Here’s what the fast kids wear – from head to toe – to go faster.
Helmets have come a long way in a few short years. There were time trial helmets, those long, unvented pointy things only the pros and way-to-serious amateurs used. Roadies wore the ‘bowls with holes’ to maximize air flow and cooling across our lids. For a while it seemed aero helmets that skirted the wind and standard helmets that attracted it were in entirely different orbits.
Fast forward to today and you’ve got helmets that are both aero and cool if not totally hip, though some are all three. Better yet, for the road enthusiast looking to ride faster, you can reduce your time over a 40K/25mile distance by between 30 and 60 seconds (10-15 watts) compared to the standard heavily vented helmets your currently wear. The performance of these new aero road helmets looks to be about 2/3rds the benefit of the full-on reverse peacock beaked lid with most of the cooling you get from a standard road helmet.
At $250/£150/€200/AU$300 for the best of them, it’s not free speed but probably amongst the cheapest speed you will find.
These aero road helmets started showing up for us enthusiasts in 2014 and there several models to choose from. I haven’t tested them yet but the models that make up this new class of helmets and where you can get them at the best prices include:
- Giro Synthe – Competitive Cyclist, eBay, Amazon, Merlin
- Bell Star Pro – Competitive Cyclist, Amazon
- Kask Protone – Competitive Cyclist ITK10, Tredz ITK10, Tweeks, Wiggle
- Louis Garneau Course – Competitive Cyclist, Amazon
- Specialized Evade – Hargrove, Cyclestore
The fit of your kit can produce massive benefits in speed if you haven’t paid much attention to them in the past. Specialized ran the wind tunnel test you see below of warm and cool weather kits that were either loose or form-fitting. At a wind speed of 50kph/31mph, the form-fitting kits saved between 80-90 seconds over a 40K/25mile distance. I’m not sure I buy that – it’s the same amount of savings as putting your body in an aero position with your arms and torso bent while your hands are in the hoods or dropped. But even if it’s half of that, its massive and also inexpensive compared to other gear you can spend your money on.
If you aren’t too embarrassed with your shape, getting a few kits that fit you snug for those rides you want to go extra fast will do it. If you aren’t as trim as you want to be just yet, the time savings you’ll get when you buy some new jerseys should be another great motivator to lose the weight.
Glove your shoes and shoo your gloves. Yeah, I just wanted to write something cutesy/clever just once in my pitiful blogging career. In reality, the straps on your bike shoes create unnecessary aerodynamic turbulence. Shoe covers smooth the air flow.
Padded gloves with Velcro straps across the top are not very aerodynamic either. Most fast cyclists don’t wear them.
With a good bar tape, you really don’t need the padding in gloves anymore. If your arms and hands sweat a lot, you may find gloves to be good for gripping the hoods and keeping the sweat out away from your shifters. If so, get the thinnest gloves you can find and ones that extend over your wrists.
Data and estimates vary over how much savings is to be had from losing the gloves and adding the covers. From what I’ve seen, it could be another 30 seconds over 40K/25miles. Another simple, inexpensive way to get faster.
Shave your legs. Tradition says to do it but is it really faster? Yes! Depending on how hairy your legs are (what Specialized calls the “Chubaka Scale”, you can save between 50 and 80 seconds over 40K according to what was probably the funniest edition of the Win Tunnel. Watch below.
This is probably the easiest and cheapest way to go faster on your bike. Get in touch with your feminine side unless, of course, you are a woman in which case you are (likely) already shaving. Men, if you want to compensate elsewhere, know that growing a beard won’t slow you down any!
And because I know someone will likely ask, if you are riding with only one water bottle, put it on your downtube rather than your seat tube to be more aerodynamic.
Note: Many of the tests I’ve quoted use either 40kph/25mph or faster speeds for 40K/25 miles for their tests. I know most of us ride slower so these time savings will be less, right? Actually, while you will finish later, you’ll actually save more time over the same distance if you ride slower despite the fact that aerodynamics improve exponentially with speed. And if you ride longer – centuries, fondos, sportives, audaxes and the like, you’re looking at more than 4x the time saved I’ve been quoting here. Yeah. Really. Zoom Zoom.
Here’s a good video explanation of why you save more time going slower.
9. Maintain Your Gear
Getting the right gear to help us ride faster is a huge focus. Unfortunately, maintaining it is not. That can cost you time on the road, time you spent dearly to achieve with the new gear.
Fortunately, maintaining your gear isn’t hard even if it does take a few minutes in the basement or garage every now and then. Think of it as another important part of your training discipline. Do it regularly and you’ll enable yourself to go faster and get as much as you can out of your gear.
Maintaining your gear is actually quite simple and inexpensive. You don’t need to be a mechanic or even terribly handy around the house to qualify. Here are the basics.
- Regularly clean and lubricate your chain – a dirty or dry chain, beyond wearing your chainrings and cogs faster than normal, makes for inefficient shifting and that slows you down. To maintain your speed, simply clean off your chain off after every ride and lube and wipe it after every few rides.
- Periodically clean and lube your bike thoroughly – Every few months or after a particularly wet or gritty ride, you’ll want to thoroughly clean your entire bike. This is an opportunity to degrease the chain and derailleurs, get the gunk out of your brakes, remove the dirt stuck to the bottom of your downtube, and generally get it humming again. A clean and re-lubed bike is not only good for the bike, it’s good for your morale as well. Here’s a great video to take you through an entire wash and lube in 30 minutes.
- Adjust or replace your shift and brake cables – Just as a dirty chain makes for inefficient shifting, stretched or worn shifter cables will do the same. Either of these situations may cause you to take longer to execute a shift or subconsciously avoid a shift altogether if you think it won’t be quick or smooth. Riders who have moved over to electronic shifting report the added precision and confidence some feel cause them to shift more frequently and more closely maintain the cadence they want. This will ultimately make you faster, or at least use your energy more efficiently and save some for when you want it rather than when you need it to recover from a bad shift.
As for brake cables, bad brake adjustment, cables or pads may cause you to brake harder than you need to going into turns, making you that much slower and using more energy to come out of them. Riders using disc brakes on their road bikes can go faster into turns and down hills with the confidence of the superior brake feel and control they have.
Adjusting your shifter and brake cables is usually pretty easily done by turning a barrel adjuster; replacing them is a bit more of a job. Four videos are worth a look here.
While most of the adjusting can and ideally should be done before you head out for your ride, you might find yourself wanting to do so on the road during a ride. Check out these two videos for how to do the simple and on the road shifter adjustment (here) and brake adjustment (here).
- Inflate your tires properly – I wrote a too long section above about setting your tire pressure where you want it to get the right balance of speed, handling and comfort for your rim size and weight. There’s little I hate more than taking a couple minutes to check my tire pressure when it’s the last thing holding me back from getting out on a ride. But, it’s worth it. If you are a couple psi off one way or the other, the next several hours on your bike could be slower or less comfortable than you want.
- Calibrate your power meter – If your power meter doesn’t calibrate for temperature automatically, take a minute before you start to do it. There’s nothing worse than being unsure about whether the big numbers you are putting up are overstated or the low ones you are seeing are a sign that you are washed up.
- Massage your legs and more – While not exactly gear, your muscles need to be maintained as well as your gear if you want to ride faster on your bike. If you can’t afford a regular visit to a masseuse (ha), you can regularly use a $25 roller along your own momentum to do the massaging. Here’s a good guide to using a roller courtesy of RideOn Magazine.
Maintaining your bike, and the speed increase that comes with it, is pretty easy.
If you want to go further and release your inner bike wrench, check out my best bike repair stories on getting the right tools and setting up a shop to work on your bike. Once you get proficient, you can save yourself some serious time and money. If you’ve already got the basics down, here are links to YouTube video libraries from Art’s Cyclery, Park Tool and GCN that will show you how to do most anything.
10. Don’t Make Yourself Slower
After all the work and money you’ve put into riding faster, the last thing you want to do is something that’s going to make you slower. Seems obvious, right? But there are some things we busy road cycling enthusiasts do all the time that slow us down.
The holy trinity of athletic performance improvement is TRAIN – SLEEP – EAT. Without getting all three working together, we limit how fast we can go on the bike.
For most normal adults 7 ½ to 8 hours of sleep is optimal before riding. If you are training hard, this is critical time for your body to recover and for your muscles to repair and grow.
I know, I know, you aren’t normal and don’t need that much sleep. Don’t have time for it either.
Perhaps so, but you are only slowing yourself down my friend. Try getting more sleep before a long weekend ride. Go to bed a half hour earlier on weeknights. See if it makes a difference (it will). You are the one that wants to ride faster. I’m just telling you to do that and how not to ride slower. Not getting enough sleep will make you slower.
As to eating, we can be our own worst enemies. Maybe you can’t eat as well as I described under 5. Drop/Hold the Weight by getting the right combination of protein, carbs, fruits and veggies with enough water to make you pee throughout the day. But don’t, I repeat DON’T think that since you ride all the time you can eat whatever you want and whenever you want.
Eating the wrong stuff at the wrong times will slow you down. Dairy for breakfast before you go out for a long ride? Bad idea. Overeating the night before a long ride? Congrats, you’ve just added a couple pounds to carry up the hills.
Even if you can’t always be eating the right things, you can certainly be smart enough not to eat the wrong things or eat at the wrong times or eat the wrong amounts. If you do, it will slow you down, plain and simple.
If you jumped into the discussion about how to ride faster with this post, be sure to check out Part 1 of How To Ride Faster On Your Bike: 10 Better Ways that focuses on the training and technique we enthusiasts use to get extra speed.
As always, I welcome your comments below. I also invite you to keep up with new posts and stay connected using the e-mail or RSS sign-ups and Facebook, Twitter and Instagram buttons all of which are in the bar on the right at the top of the post. And, if you found what you’ve just read valuable and want to save money on cycling gear while supporting this site at the same time, click on the links to any of the stores that you see in the posts, the home page or my review of the best online bike stores. If you prefer, you can also support this site by making a contribution here. Thank you.